SECTION 4. . ROUTINE MAINTENANCE
WEEKLY
1. Check tyre pressures are 620kpa (90psi) for High Pressure
345kpa (50psi) for Standard Tyres
2. Check condition of tyres and castor wheels
3. Clean frame parts with mild soapy solution.
4. Wipe upholstery with a clean damp cloth
5. Check function of brakes.
6. Remove Quick Release axles and wipe clean socket and axle. Apply dry lube to
axles when reassembling.
7. Check spokes on rear wheels and re-tension if required.
MONTHLY
1. Give the chair a general inspection for loose nuts and bolts.
2. Check the function of fold down back mechanism. Ensure that release lever
and plunger are free.
3. Check tension of seat upholstery. Re-tension if necessary.
ANNUALLY
It is advisable to have an annual inspection of the SPX Manual Chair performed by an
authorised Glide Rehabilitation Products Agent. Their knowledge and experience
enables them to identify and correct problems that might otherwise go undetected.
For any questions concerning procedures or service, contact your nearest Glide
Rehabilitation Products Agent or Glide Rehabilitation Products direct.
USER & MANUFACTURER SERVICEABLE PARTS
The only user serviceable parts are as per Section 6.
All other components are to be repaired by Glide Rehabilitation Products.
PACKING & SHIPPING
The SPX Manual Chair is shipped to Glide Rehabilitation Products agents in a fully
enclosed cardboard box to minimise damage during transport.
Your chair should arrive to you fully assembled and ready to use.
If your chair needs to be transported interstate or overseas, it is recommended that a
shipping box is used. These can be purchased from your nearest Glide Rehabilitation
Products agent or dealer.