22
Recommended Grease
Type: Molybdenum disulphide 3%
Brand:: Valvoline - Valplex M Grease or similar
Annually
It is advisable to have an annual inspection of the Power Chair performed by an
authorised Glide Products Agent. Their knowledge and experience enables them to
identify and correct problems that might otherwise go undetected.
For any questions concerning procedures or service, contact your nearest Glide Products
selling Agent or Glide Products direct.
Seat frame stop
The Seat Frame Stop is a safety stop only and is factory set to the correct height. If
adjustment is required, then the following procedure must be followed. Firstly the tilt
seat actuator must be set in the bottomed out position and then the adjuster set so it is
just toughing the seat frame. The adjuster must not be used as a limit stop. Damage to
the actuator or seat frame will occur.
There are two different sizes of stops.
Type A 37mm - for Anterior Tilt or 0 degree rake.
Type B 45mm - 4 degree seat rake
Vertical Lift wheelchairs use a fixed type stop.
