2
Before use please read this manual
1.Safety Precautions:
*To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
*Do not spill water or other liquids into or on to your unit.
*Be sure that the local power outlet match that of the required volt- age for your unit.
*Do not attempt to operate this unit if the power cord has been frayed or broken.
*Do not attempt to remove or break off the ground prong from the electrical cord.
This prong is used to reduce the risk of electrical shock and ire in case of an internal
short.
*Disconnect from main power before making any type of connection.
*Do not remove the cover under any conditions. There are no user serviceable parts
inside.
*Never operate this unit when its cover is removed.
*Never plug this unit in to a dimmer pack
*Always be sure to mount this unit in an area that will allow proper ventilation. Allow
about 6(15cm) between this device and a wall.
*Do not attempt to operate this unit, if it becomes damaged.
*This unit is intended for indoor use only, use of this product out doors voids all
warranties.
*During long periods of non-use, disconnect the units main power.
*Always mount this unit in safe and stable matter.
2.Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical
lenses must be carried out periodically to optimize light output.
1.Use normal glass cleaner and a soft cloth towipe down the outside casing.
2 .Clean the external optics with glass cleaner and a soft cloth every 20 days.
3 .Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture
