www.goedlichtengeluid.nl
2
Getting It Out Of The Box
Congratulations on purchasing one of the brightest, best-built led uplights anywhere! Now
that you’ve got your
Creator Basic Battery DLX
, you should carefully unpack the box
and check the contents to ensure that all parts are present and in good condition. If
anything looks as if it has been damaged in transit, notify the shipper immediately and
keep the packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please verify that the
fixture you receive is suitable for your local power supply. See the label on the fixture or
refer to the fixture’s specifications chart for more information. A fixture’s listed current
rating is its average current draw under normal conditions. Check the fixture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
The Lithium Battery System
The
Creator Basic Battery DLX
features our proprietary Lithium-Ion internal battery
system which allows the user to operate their light without AC power for up to 20 hours.
It is powered with Lithium Battery of 14.8V 8.8Ah=131Wh
When you get the
Creator Basic Battery DLX
at the first time,
please install the
2.5A fuse into the fuse holder on the light
, which you can find in the carton box. As for
air or sea shipping safety, all battery powered fixture need designed to be off and can not
been turned on at any time during shipping.
Turn on the power switch on the The
Creator Basic Battery DLX
you can find
the
approximate percentage of power remaining from the TFT Screen as below:
BATT: 50% TEMP: 36C
To charge the battery simply plugs the light into a power source. The battery will charge
weather the light is powered on or off. It will charge even while in use. The built-in
microprocessor of the battery system controls the charge and overall battery health, so all
you need to do is plug and play. From the TFT Screen you can see the approximate
percentage of power remaining. When after 3 hours charging, you can find the
BATT: 100% TEMP: 36C
IMPORTANT:
Please ask the professional engineer to repair if there is any quality question, or send
back to the factory, please do not repair by yourself.
The “Wireless DMX System”
1.
The
“Wifi dmx”
includes one
“ WifiDMX Box”
, and
“wifiDMX RECV”
on each Light, you can
connect the
“WifiDMX Box”
to
DMX Controller.
2.
For each
“WifiDMX Box”
and
“WifiDMX RECV”
, there is 7 ID, each ID match one led light color from
Red, Green, Yellow, Blue, Violet, Cyan, White; that means you can set up 7 groups of Wireless
Transceiver System for different lights in the same Place, and each wireless transceiver system will
not disturb others.
3.
Press the “ID Setting” button on the
“WifiDMX Box”
and
“WifiDMX RECV”
both to select your
desired operating group
