Page
15
of
21
Running Dante
®
Controller
At the time of writing this manual the Dante
®
Controller looks as per the screenshot
below:
The Express
IP
MINI will have been named at the factory during test to allow them to be
identified by the Dante® controller.
The format used for the factory name is:
‘Express-SN-100’
Where ‘Express’ refers to the Glensound product Express IP Mini and ‘SN-100’ refers to
the its serial number.
Dante® Controller TIP
If you have never run Dante® controller before then make sure that on the bottom left
of the Dante® controllers’ screen ‘P’ or ‘S’ is next to a green square as this indicates that
it is connected to a network. By clicking ‘P’ or ‘S’ a pop up box opens to allow you to set
what network interface the controller is using.
