Page
16
of
26
AES67 MODE
The Virgil OB uses a chipset from Audinate called Ultimo for its network audio
interface. Audinate are the company behind Dante
®
and as such the chipset’s
primary network audio protocol is Dante
®
, however Audinate have enabled their
chipset to comply with AES67 and therefore the AoIP22 can be set to AES67 mode
for interaction with other AES67 devices.
Pleas
e note however that Glensound are relying on Audinate’s AES67 interface and
are unfortunately not able to provide full AES67 support for the unit. AES67 support
should be sought directly from Audinate.
1. Turning On AES67 Mode
If you want to use your Virgil OB on an AES67 network and it has not been set to
AES67 mode then this can be set in Dante
®
controller by double clicking the Virgil
OB to open the Device View window where you will find an AES67 tab to enable
AES67 support.
Once the AES67 drop down
box has been enabled you’ll have to reboot the Virgil
OB for the change to take effect. After the reboot go back to the AES67 tab and set
the multicast prefix address to one that is suitable for your network.
