Page
30
of
52
Output Levels
The output levels menu allows you to alter the audio levels being sent to various
circuits within the unit.
Options and brief descriptions are below:
HEADPHONES
This is the headphone volume setting, although the headphone volume can be
altered from this menu it can also be altered at any time by adjusting Control Shaft
Encoder
OUTPUT TO GSM
This is the ‘output’ level of the internal electronics being sent to the input of the
mobile phone module. So some people may consider it an input level!
If this is set to 100% and
you’ve got outgoing distortion on the mobile phone circuit
then it can be turned down to reduce the incoming level from the analogue line in
and the Dante® network input.
LINE OUTPUT
This is the level being sent to the analogue line output XLR
OUTPUT TO HANDSET
This is the level being sent to the optional telephone handset
OUTPUT TO DANTE GSM
This is the output level being sent to the Dante® network interface from the mobile
phone. This is the equivalent output of the analogue line level output on the rear of
the unit.
The mobile phone output can be transferred between this output and the Dante From
Handset output and will only exist on one circuit at a time.
OUTPUT TO DANTE HANDSET
This is the output level being sent to the Dante® network interface from the mobile
phone. This is the equivalent output of the audio being sent to the telephone
handset.
The mobile phone output can be transferred between this output and the Dante From
GSM output and will only exist on one circuit at a time.
Use the
touchscreen to
scroll up/ down
to see all the
options
