Glenayre Document Number: 9110.00160
250-Watt Gold Line Power Amplifier
Issue 1, Rev. C: 10/21/96
OPERATION
Print Date: 12/17/96
Copyright © 1996 Glenayre
Page: 5-1
5
OPERATION
5.1
Controls and Indicators
The PA has one indicator and no controls.
Figure 5-1, Front-Panel View with Cover
Removed
shows the location of the PA indicator LED1.
5.2
Operation
5.2.1
Turn PA On and Off
The PA does not contain an on/off switch, but turns on and off whenever the power supply
equipment is turned on and off. When the PA is on, it remains in a standby condition until
keyed. Refer to the power supply manual for turn-on and turn-off procedures.
5.2.2
Turn Fan On and Off
The fan does not contain an on/off switch, but turns on and off whenever the power supply
equipment is turned on and off. The fan runs continuously whenever the power supply
equipment is on. Refer to the power supply manual for turn-on and turn-off procedures.
5.2.3
Key and Unkey PA
The PA does not contain a key switch, but is keyed and unkeyed by the exciter/PA control
equipment. This exciter must be keyed and unkeyed remotely through transmitter
controller, or locally through a video display terminal (VDT). Refer to the controller
manual for remote key and unkey instructions, or to the VDT manual for local key and
unkey instructions.
