Glenayre Document Number: 9110.01306
GL-T8200 1- to 25-Watt 900-MHz Power Amplifier
Rev. A: 03/23/99
DESCRIPTION
25
w
8
20
0
3
Print Date: 05/10/99
Copyright © 1999 Glenayre
Page: 3-1
3
DESCRIPTION
This is a 1- to 25-watt PA intended for use on the 900-MHz band. This PA is characterized
by integrated monitoring devices that supply critical status information to the DSP exciter.
This exciter contains diagnostic software that can detect and report a faulty PA.
3.1
Physical Description
Refer to Figure 3-1 and Figure 3-2. The PA consists of a 3 RU high chassis, including
convection fins and one fan.
The chassis contains a PA board which contains metering circuitry, power distribution
circuitry, and RF amplification circuitry.
3.1.1
Mounting Provisions
The PA is mounted to the front of most standard 19-inch equipment racks by means of eight
screws. The front panel of the PA may by removed while the PA is mounted in the rack for
access to fuses. Thumbscrews secure the front panel to the PA.
3.1.2
PA Chassis Rear Connector Panel
Refer to Figure 4-2 for a list of connections for the PA. The PA chassis rear connector panel
has an RF input connector, an RF output connector, a dc power input connector, a dc power
output connector, a fan, and a 15-pin connector for connection to the DSP exciter.
