Before First use : Placing/ Replacing the filters
The apppliance comes with all filters fitted inside, but you have to remove the packaging of the
filters before you use the appliance remove all filters, unpack them and place them back into the
appliance as described below.
Tip : Place the appliance against a wall for more stability when you remove or insert filters.
Note: You should make sure the filters are inserted in the right position
Note: Make sure that the side with tag marked
‘Front’ is onwards
4. Put the filters back into the appliance.
2. Remove all the filters from the appliance.
1. Place you fingers in recesses of the side
panels and gently pull the top part of the front
panel towards you. Then lift the hooks at the
bottom of the panel out of the bottom of
the appliance.
3. Remove all packaging material from
the filters.
USING YOUR AIR PURIFIER
Please refer to the following control panel icon and instructions for using this product
l
Power :
Put the plug in the wall socket, all lights go on and you hear a beep. Then the lights go
out again. Press the on/off button to switch on/off the appliance.
l
Timer :
Press the “Timer” button to select the duration. We can set the timer to 1h, 2h, ....upto
8h. Select ‘--’ to bypass the timer and manually turn off when required.
l
Pattern:
The pattern button is used to select the mode of operation. It has three settings
1. Automatic 2. Sleep 3. Purify.
Automatic :
When the appliance is in Auto mode the built-in air quality sensor automatically
measures the ambient air quality and selects the most appropriate fan speed for the measured air
quality. Select the auto mode with the pattern button as required.
Sleep :
When the machine is in sleep mode, the fan runs at low speed the anion is on, the sleep,
light is on and the rest of the icons are off. Apart from the “Pattern” key other buttons will not
operate. Press the “Pattern” key to exit the sleep mode.
Purify:
This is the default mode which is selected when the appliance is switched ON. Whenever
the appliance is not in ‘Auto’ or ‘Sleep’ mode it remains in purify mode. At this time the
purification process continues.
l
Negative ion:
Press the “anion” key, and negative ionic bond generator starts working. The
negative ion indicator, goes ON. Built in ionizer produces million of negative ions to promote the
elimination of airborne allergens and germs.
l
UV Germicidal Sterilization
: In the purification mode, press the “sterilization” key the UV
germicidal lamp is activated and Sterilization begins to work.
l
Fan Speed:
If you do not use the auto mode, you can select the desired fan speed yourself.
1. Press the on/off button to switch on the appliance.
2. Press the Fan Speed button one or more times to select the desired fan speed. The
corresponding fan speed light and the indications above the lights show the set fan speed (1,2,3).
l
Air Quality Indicator :
The air quality
indicator shows different colors, that
means dirrerent air quality.
Color Air quality
Blue Good
Yellow Fair
Red Bad
l
Remote :
For convenient usage of the air purifier from a distance, a remote has been provided
with most functions.
