10
Instructions For The
Installer
GAS CONNECTION
The cooker is designed to match the depth of standard 600 mm worktops. An
adaptor backplate should, therefore, be fitted within the shaded area shown to allow
the cooker to be pushed fully to the wall. If a forward facing backplate is used, it
must be chased into the wall.
Connection to the cooker should be made with an approved appliance flexible
connection to BS 669. A length of 0.9 to 1.2m is recommended. The length of hose
chosen should be such that when the cooker is in situ, the hose does not touch the
floor.
The temperature rise of areas at the rear of the cooker that are likely to come in
contact with the flexible hose do not exceed 70ºC
90mm
55
0m
m
75
0m
m
180mm
KITCHEN FLOOR
