Glen Dimplex 900CGH Mk2 Instruction Manual Download Page 4

4

Cooker

 

hood

3

Cooker

 

hood

 Data

Power Supply:220-240V ~ 50Hz
Rating:140 watts
Light:Lamp  2 x 20 watts
Our policy is one of continual improvement in design and development, 
therefore strict accuracy of illustrations and descriptions cannot be 
guaranteed.

This appliance conforms to the 
following EC Directive:
This appliance meets the provisions 
Of the following directives:
2004/108/EC (electromagnetic compatibility), 2006/95/EC
(electrical equipment designed for use within certain voltage limits) as 
amended.

Retention of this instruction book.

Keep this book in a handy place for reference.It contains important 
details on the safe and proper use of your appliance.

 

Not more than 750mm

 Installation position and height

Not less than 650mm

2

INSTALLATION

1  

2   

0

OPERATING  INSTRUCTIONS

The cooker hood should be fixed right above and on the same axis as the

cooker.

We recommend that after installation the bottom of the hood should be no 

less than 650mm and no more than 750mm above the cookers heating 

element/burners.

This cooker hood must be earthed. 

Summary of Contents for 900CGH Mk2









Reviews: