20
Specifications subject to change without notice.
If have questions,please contact the dealer.
Cleaning
Cleaning schedules for lighting fixtures vary greatly depending on the operating
environment. Environmental factors that may result in a need for frequent
cleaning include:
• Use of smoke or fog machines.
• High airflow rates (near air conditioning vents, for example).
• Presence of cigarette smoke.
• Airborne dust (from stage effects, building structures and fittings or the natural
environment at outdoor events, for example).
If one or more of these factors is present, inspect fixtures within their first 100
hours of operation to see whether cleaning is necessary. Check again at frequent
intervals. This procedure will allow you to assess cleaning requirements in your
particular situation. If have any question,please contact dealer.
Use gentle pressure only when cleaning, and work in a clean, well-lit area. Do
not use any product that contains solvents or abrasives, as these can cause
surface damage.
Warning! Disconnect from power and allow to cool before cleaning.
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of the
fixture and the air vents at the back and sides of the head and in the base with
low-pressure compressed air.
3.Please use the professional cloth to clean the optical lens and soak with low
concentration detergent liquid.
Do not rub the surface hard: lift particles off with a soft repeated press. Dry with
a soft, clean, lint-free cloth or low-pressure compressed air. Remove stuck
particles with an unscented tissue or cotton swab moistened with glass cleaner
or distilled water.
4. Check that the fixture is dry before reapplying power.
Summary of Contents for GL350BSWT
Page 4: ...4 Dimensions ...