GLD Products
Tucson 7' Billiard Table
Item 64-0140
1-800-225-7593
12
www.gldproducts.com
STEP 6
- LEVEL THE TABLE BASE
1. Place table into position in your room (13' 4" x 17' 0" minimum). Measure ends at base
frame to walls, making sure there is at least 60" between the table and the wall. You do
not want to move the table after this step.
2. Use a carpenters level to find the low side.
3. Lift the table leg off the floor and unscrew the leveler out of the base a small amount.
4. Repeat until the base is level. Be sure to check level at both ends side to side as well as
the longer length.
5. Your table is ready for use.
Care and Use of your Table
•
This product is intended for INDOOR use only.
•
DO NOT sit, climb, or lean on the table.
•
DO NOT drag the table when moving it. This will damage the legs.
•
Keep your table covered. The playing surface can be brushed to
keep clean.
•
DO NOT lift the table by placing your hands under the pockets, and
do not sit, lean or put pressure on the pockets.
•
The cloth playing surface can rip or tear. Keep sharp objects off the
playing surface.
•
Some “trick shots” may tear or dimple the cloth surface.
•
To clean the hard surfaces spray a cloth with a mild cleaner and
wipe.
