Glaziar Predator PUR30WIFI, Instructions For Use Manual

Page: 14 / 24

www.glaziar.com / info@glaziar.com
14
USE
3. Bellow mentioned is how the air quality indicator light works.
PM 2.5 Range Air Quality Light indication
0-75 Good Green
76- 150 Fair Yellow
>150 Poor Red
1. Standby.
Insert the plug of air purifi er into power source, all the indicators will lighten. After one second, air purifi er
is in standby mode.
2. “Power” on/off
Press button once, “Power” indicator lightens, after three seconds, the air purifi er turns into Speed “1”. The
blue light will lighten.
3. “Speed”
Press “Speed” button to select speed setting form “Auto mode” -> “1” -> “2” -> “Sleep mode”.
Press “Speed” to “S” (sleep) mode, after 5 seconds, all the lights are off, only “S” light is semi-lighting. Press
any button to quit “Sleep” mode.
In the setting Automatic the integrated smart sensor (Intelligent Particle Sensor TM) measures and regulates
air quality automatically. The fan controlled by a sensor anticipates automatically to what extent indoor air is
polluted by particles size PM2.5 and adapting to the 3 different speeds accordingly.
4. WIFI indicator
When the appliance is turn on, touch and hold the WIFI button for 3 seconds. A beep can be heard after
which the machine enters the WIFI confi guration function.
The WIFI indicator fl ashes when unit enters the WIFI mode.
Unbundling function: in the power-on state. Long press the WIFI button for 3 seconds, the buzzer will beep
once, and the device can be unbundled.
Once air purifi er is powered on, “Filter Reset” will count down. If air purifi er is powered off and restart, it
continues to count down. “Filter Reset” is designed for 2000 hours. Once the time is accumulated to 2000
hours, “Light button” will fl ash continually.
After replace with new fi lter, press “Light button” for 3 seconds, then “Light button” indicator will
be off.
5. Ionizer
When switch on the air purifi er, the “ionizer” function is working