Model Number
Rough Opening Single Cabinet
Overall dimensions
Width
Height
Width
Height
GC1672
14 3/8”
72 1/8”
15”
72 3/4”
GC 2072
18 3/8”
72 1/8”
19”
72 3/4”
3
Tools Required for Installation
GlassCrafters recommends the following tools to
properly and safely install your Mirrored Cabinets.
A. Safety Glasses -- should be worn at all times
B. Tape Measure
C. Level
D. #2 Phillips Head Screw Driver
E. Power Screw Driver
F. Electric Drill
G. 8mm 3/16” Masonry Drill Bit
H. 7/32” Drill Bit
I. Non Ammonia Household Glass Cleaner
J. Soft Paper Towels
Single Cabinet “RO” Rough Opening formula: Overall cabinet width less 5/8” = Rough Open-
ing
Height: overall cabinet height less 5/8” = R.O. Height.
Cabinets are supplied with left or right hinges. Be sure to install with the correct hinged side
as per the room plans.
Important: Make sure you allow for a minimum of
4” toe kick clearance above the finished floor.
Rough Opening:
Note: Cabinet installs over finished wall with sheetrock
and/or tile finishes completed. 3/4” Flange on all sides of
the cabinet will cover the remaining space in the R.O.
Determining the Rough Opening “RO” Dimension
Framing in new construction should follow these dimension. Standard 2x4 studs and 1/2” sheetrock are shown in the il-
lustrations. For 6” deep models 2x6 studs are required or a semi-recessed application is necessary.
Recommended Clearance
4” for Toe Kick
Above Finished Floor
