12
Glass Shelves Installation
After the Mirrored Cabinet box has been properly in-
stalled, determine the appropriate height and location for
the glass shelves.
Note: make sure the back wall mirror has been
completely cleaned after installation. If cleaning the back
wall mirror is necessary, use a household non-ammonia
glass cleaner.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing
ammonia. This may cause chemical damage to the
mirror and void the warranty.
Besides the factory installed Electric Option shelf assembly,
the cabinets come with the following:
30” Height Series = 3 Glass S 12 Shelf Clips
36” Height Series = 4 Glass S 16 Shelf Clips
For cleaning the mirror, we recommend using
“ammonia free” sprayway brand glass cleaner,
which is available at a variety of retail outlets.
www.spraywayinc.com/content/glass-cleaner
each glass shelf will require four (4) shelf clips.
Use care when handling the non-tempered
glass shelves. on a level plane insert the shelf
clips into the pre-punched holes. The clips are
designed for a tight tension fit to hold the shelf.
Place each glass shelf on the top of the left clip
first, then slowly lower onto the right clip with a snap fit.
After glass shelves are installed insert hole plugs in all
open holes to complete installation.
Maximum load for 5/16” Clear Glass Shelf is 3 pounds.
Maximum load for Aluminum Electrical Shelf is 3 pounds.
Hole Plugs
5/16” Clear Glass shelf
White opal Acrylic shelf
electrical shelf
