Glaser-Dirks DG-800 A, Flight Manual

Page: 86 / 110

Flight manual DG-800
Issued: Oktober 2004 TN 873/32 7.7
29) Throttle handle with integrated starter button
The starter button is only activated when the engine is
extended and the ignition switch is in the "on" position.
As soon as an engine speed of 1200 RPM is exceeded, the
starter will be switched off.
Aligning the propeller for retraction with the starter button
If the propeller after stopping is not in the retraction position, it is possible
to turn the propeller slowly with the starter motor into retraction position
by pressing the starter button (ignition switched off). The starter motor
speed is reduced by electronic means during this procedure. This
procedure should not be used on the ground due to the slow starter motor
speed.
30) Choke (black) pulled out = closed
pushed in (front) = open
31)
Propellerbrake manual
32)
Rear view mirror to watch the propeller during aligning procedure
33)
Fuses a) circuit breaker 10 A for the engine extension -
retraction motor
b) circuit breaker 4 A for the DEI
c) circuit breaker 4 A for the 12 V socket
d) circuit breaker 3 A for the radio
e) circuit breaker 3 A spare for turn-and bank indicator
or horizon
f) circuit breaker 2 A for the electric variometer
g) circuit breaker 10 A for the generator, the control unit
and the proximity switch
34) Switch for the electric propellerbrake (Option)
to the rear: automatic brake on prop
centre: off
off brake
to the front: braked auto
The red cover plate of the manual extension-retraction switch (27) holds
the switch for the propellerbrake in the "auto" position.
Throttle
Starter
Choke
Propeller-
brake
on prop
off
auto brake