Glasdon Single Orbis Sign Kit Installation Instructions Download Page 3

Page: 3 / 4

KIT CONTENTS:

ITEM 1

- Sign Carrier

x 1

ITEM 2

- 2 Point Bracket

x 1

ITEM 3

- M8 x 200mm Hex Bolt

x 4

ITEM 4

- M8 Washer

x 8

ITEM 5

- M8 Nyloc Nut

x 4

EQUIPMENT REQUIRED:

13mm Spanner

x 2

Orbis Post (supplied separately)

DIAGRAM NOT TO SCALE

IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE

DOUBLE ORBIS SIGN KIT

INSTALLATION INSTRUCTIONS

Summary of Contents for Single Orbis Sign Kit

Page 1: ...EM 3 M8 Washer x 4 ITEM 4 M8 Nyloc Nut x 4 EQUIPMENT REQUIRED 13mm Spanner x 2 DIAGRAM NOT TO SCALE 1 2 3 4 SINGLE ORBIS SIGN KIT INSTALLATION INSTRUCTIONS IMPORTANT NOTE ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE Orbis Post supplied separately ...

Page 2: ...ing holes 2 Insert the Orbis with the bolts through the holes of the Orbis Post supplied separately 4 Secure in position with M8 Washers and Nuts using 13mm Spanners 3 Locate the Sign Carrier s fixing holes on to the exposed bolts protruding through the rear of the Orbis Post ...

Page 3: ...ex Bolt x 4 ITEM 4 M8 Washer x 8 ITEM 5 M8 Nyloc Nut x 4 EQUIPMENT REQUIRED 13mm Spanner x 2 Orbis Post supplied separately DIAGRAM NOT TO SCALE 2 1 5 4 IMPORTANT NOTE ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE DOUBLE ORBIS SIGN KIT INSTALLATION INSTRUCTIONS 3 ...