background image

 

.

Stock No. C000/1034 - DWG No. 12B-112-13 Issue 3 - October 2018 

AND GLASDON ECHELON ARE TRADEMARKS OR REGISTERED TRADEMARKS OF GLASDON 
GROUP OR ITS SUBSIDIARIES IN THE U.K. AND OTHER COUNTRIES.

A planned maintenance schedule or regular inspection is recommended, replacing 
components as necessary.
Replacement components are available direct from GLASDON.
GLASDON cannot be held responsible for claims arising from incorrect installation, 
unauthorised modifications or misuse of the product.

© Copyright 06/2018
Glasdon UK Ltd reserve the right to alter specifications without prior notice.

4 of 4

IMPORTANT NOTE: PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND THAT A 

COPY IS GIVEN TO STAFF INVOLVED WITH THE INSTALLATION AND MAINTENANCE OF THIS PRODUCT.

SAFETY NOTE: PLEASE REFER TO ‘THE MANUAL HANDLING OPERATIONS REGULATIONS 1992’ DURING HANDLING.

Summary of Contents for Echelon

Page 1: ...Kit Please also refer to the Manual Handling Operations Regulations 1992 during the handling of the product and materials used for installation Glasdon recommends that a full Health and Safety analysis is carried out prior to installation IMPORTANT NOTE ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE 1 of 4 DIAGRAM NOT TO SCALE ITEM 3 3mm Polycarbonate End Panel x 1 ITEM 4 ...

Page 2: ...ground fixing and washer into the drilled hole and tighten with Socket and Wrench Set For optimum fixing performance the following procedure is recommended INSTALLATION GROUND FIXING INSTRUCTIONS Concrete Surface Mount Adjustable Feet 80mm 80mm 4000mm 4115mm 2285mm A 200mm Detail View A Minimum Conctrete Depth Minimum distance afrom any edge of the concrete In cases of uneven ground use the adjust...

Page 3: ...e holes with the fixing points in the frame Remove the remaining protective film from the panel Insert the remaining fixings into each of the holes and tighten using the allen key to secure the panel Repeat around the perimeter ensuring all fixings are secure NOTE Take care do not overtighten If using a torque wrench or drill to tighten a force of no more than 10Nm is required Insert the assembled...

Page 4: ...om GLASDON GLASDON cannot be held responsible for claims arising from incorrect installation unauthorised modifications or misuse of the product Copyright 06 2018 Glasdon UK Ltd reserve the right to alter specifications without prior notice 4 of 4 IMPORTANT NOTE PLEASE ENSURE THAT ALL RELEVANT PERSONNEL READ THE POINTS LISTED WITHIN THIS LEAFLET AND THAT A COPY IS GIVEN TO STAFF INVOLVED WITH THE ...

Reviews: