J:\Std User Instructions\099A LC1012, 099A LC1024_LARGE CAPACITY MIXERS.doc
3
02/11/14
Safety
This product has been designed for safe operation when in normal use. Please read the
following Safety Information before operating the equipment.
Unless specifically designated otherwise, Glas-Col mixers are not intended for
use with flammables or in hazardous areas.
Do not charge or remove a vessel while still in motion.
Check the mixer before each operation. Damaged mixers should be removed from
service immediately.
Do not place hand around drive plate edge during operation.
Specifications:
Power:
LC1012
120 vac +/-10%
50 to 60Hz. +/- 5%
LC1024
240 vac +/-10%
50 to 60Hz. +/- 5%
Ambient Temperature:
77
o
F/25
o
C +/-5
o
C
Operating Enviornment:
0 to 90% relative humidity
32 to 100
o
F/0 to 37
o
C
Maintenance
Glas-Col mixers do not require regularly scheduled maintenance. However, regular
inspection is recommended. Glas-Col mixers should be protected from chemical spillage,
mechanical damage and corrosive atmospheres so far as possible. Contamination,
overheating and general misuse will greatly reduce the life of a mixer.
Replacement or different cartridge sizes are available for the Large Capacity Mixer. See
the chart below for sizes available. For custom cartridge sizes consult the factory.
Limited Warranty
Glas-Col warrants products of its manufacture to be free from defects in material and
workmanship
for one year
and agrees to repair or replace without charge any products
found defective upon examination at the factory. With proper care and operation, Glas-
Col products will give long and efficient service. Chemical spillage, overheating,
