background image

Cables

Mains supply cable must be approved for fixed installation. The external diameter can be 4–12 mm (M20 gland) or 

10–18 mm (M25 gland) as main choice, but different glands sizes can be supplied. Cross sectional area of the wires 

can be between 1.5 and 6.0 mm

2

. The cable must have an earth wire and shielded cable is recommended to be 

used.

Operation of MAX LED in emergency mode

MAX 600 LED 2200 give 16% light level at E1 and 9% at E3. MAX 1200 LED 4500 give 13% light 

level at E1 and 6% at E3. When mains voltage is switched on the charging indicator (green LED) will light, indicating 

charging of the battery. If the connection to the battery is disrupted or the battery is defect, the indicator will not light. 

Reset fault indication by switching off/on power supply. A new or discharged battery must be charged for at least 24 

hours in order to be full charged.

Battery pack replacement

When the battery pack is defect or need to be replaced, use only original battery pack from Glamox 

•  4.8V 4.0Ah Item no: PA140818001 for MAX 600/1200 LED 3500/6500

•  7.2V 4.0Ah Item no: PM161012000 for MAX 600/1200 LED 2200/4500

Battery type is marked inside MAX LED.

Do not replace the battery when an explosive atmosphere is present.

Control and inspection

General inspection and main function control to be carried out once a month. Fully emergency duration test by 

switching off power supply should be performed at least once a year and the specified emergency light time shall be 

observed.

Maintenance

The MAX LED is designed to operate many years with a minimum need for maintenance. However it may be 

necessary to clean the diffuser if it gets dirty. Do never use any solvents for cleaning polycarbonate diffuser due to risk 

of generating static charge. Use moist cloth only, no solvent. If battery and other components need to be replaced, it 

is important to use only original Glamox components.

Cycling of battery

To have best lifetime of batteries, cycle the batteries at least 2 times by charging for 24 h and discharge until the 

emergency light turns off. To cycle, just switch the circuit breaker on/off.

MAX LED operation, inspection and maintenance

8

Summary of Contents for MAX LED Series













Reviews: