Page 8 of 29
12.02.2020
7179750301 / Index 06
de
en
fr
tr
el
es
pt
da
nl
no
sv
pl
cs
hu
Safety and accident prevention regulations
Besides the safety and accident prevention regulations of the employers‘ liability
insurance associations, the following notes must be observed in order to avoid
personal injury and material damage:
The explosion-proof floodlight must only be operated for its intended use, as
otherwise hazardous situations resulting in injuries or death can occur (see
section “Intended use”).
The operator is responsible for compliance with the intended use, and in par-
ticular for ensuring that only authorized personnel work on the explosion-
proof floodlight.
The national, local and system-specific provisions and requirements must be
observed.
Diverse hazards can result if the working area is not adequately lit. The op-
erator must ensure adequate lighting to prevent these hazards.
The explosion-proof floodlight may only be used with properly mounted safe-
ty and protection devices. These devices may only be removed for mainte-
nance and repair work. After completing this work, the safety and protection
devices must be immediately reinstalled. Otherwise there is a major risk of
injury.
Maintenance and repair work may only be carried out by authorized technical
personnel after disconnecting the power supply.
Implementation of the specified maintenance and repair work is part of the
intended use of the explosion-proof floodlight, in particular compliance with
the maintenance intervals. If you do not carry out this work, fault-free func-
tioning cannot be guaranteed and hazards can result for persons and mate-
rial objects. We recommend that you keep maintenance logs.
Before maintenance and repair work, including cleaning work, the power
supply must be switched off and, if necessary, disconnected from the power
supply network (disconnect from mains). It must also be ensured that nobody
else can restore the connection to the power supply. Otherwise there is a risk
of injury.
Observe the safety labels and data on the rating plate, which are located on
the explosion-proof floodlight. These may not be removed. If they become
unrecognizable or are lost, please contact the Customer Service. Illegible or
missing safety labels or rating plates lead to loss of the floodlight’s approval,
The explosion-proof floodlight may not be operated in a defective condition,
as considerable risks of injury can result from this. If faults occur, in particular
safety-relevant faults, the module must be disconnected from the power sup-
ply and repair work initiated.
