19
20°C
20°C
x2
Canceling a period of temperature cutback
Hold down and press once on
or to override the current active
period, or the next period of tempera-
ture cutback. The lamp is lit steadily
for the period in question. Tempera-
ture cutback will resume as usual from
the subsequent period.
Temperature override
Selecting another temperature during
either a comfort or cutback period,
without storing it (by pressing for 5
seconds), will apply only to the current
period.
Change the temperature setting
(comfort or cutback)
When in the comfort or cutback
temperature mode, choose your new
comfort or cutback temperature by
pressing or .
Save the setting by pressing more
than 5 seconds.
Change the duration of temperature cutback
and/or the cutback temperature
Hold down on and press twice on
or . Release and h (hours) will
flash 3 times.
Using the or key select the
number of hours you want the cutback
to last.
Confirm by pressing key briefly.
°C will flash 3 times and then the cur-
rent cutback temperature will flash.
With or key select the cutback
temperature.
Confirm by pressing key briefly.
Permanently delete cutback function
To permanently delete a temperature
cutback function, press or until
the green lamp goes out.
Calibration
Should the actual room temperature
and DT’s setting not correspond, DT
should be calibrated.
First let the thermostat work at the
same temperature setting, preferably
for at least 24 hours, keeping doors
and windows closed. This makes
certain that DT that is regulating room
temperature.
Hold down on and press once on
. Release . ºC will flash 3 times
and the setpoint temperature will
flash. Press or until the display
shows the same as the actual measured
room temperature. Store by pressing
for 5 seconds.
The thermostat will now work with the
temperature displayed by DT and after
a period this will correspond with the
actual temperature of the room. This
procedure can be repeated at a later
date to ensure correct calibration.
Reset the thermostat to factory default values
Nb! Reset is not possible if the thermostat display is in any flashing
mode.
After resetting, the thermostat has to
be reprogrammed according to the
instructions for your chosen mode.
Switch the heater OFF.
Hold in the key and then switch the
heater ON.
Hold the key in for more than 5
seconds until rE starts flashing in the
display.
Release and HO (Home Mode) will
flash.
You can select between modes HO, OF
(Office) and CA (Cabin) by pressing
the or keys.
Confirm your choice by pressing the
key for more than 5 seconds.
22 (°C) will flash. Select your pre-
ferred comfort temperature.
Confirm by pressing in the key for
more than 5 seconds.
If you do nothing, 22 (°C) will auto-
matically be stored after 7 seconds.
Child lock
To lock: Press and at the same
time until you see - - in the display.
To unlock: Press and at the same
time until you see - - disappear in the
display.
If you have first pressed to change
the daytime cutback settings, d will
now flash three times and a random
number is displayed. Use the or
key to select the correct day (Monday
= 1, etc.). Confirm by pressing
briefly.
UK