PARTS
1 2
Front View
Top View
1. Indicator light
2.
Microphone
3. Volume down/previous button
4. Volume up/next button
5. Hands-free function/Play/Pause button
6. ON/OFF Switch
7. DC-5V IN Charging port
8. LINE IN Jack
9. Stand
3
4
5
6 7
8
9
Rear View
Accesories
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. It is recommended to charge the internal battery for about 2 hours before
using thespeaker.
The fully-charged battery can give up to 7-hour playing time at 50% volume depending on genres of music and
volume.
1.Connect the micro USB plug end of the supplied cable to the charging port on the back of the speaker. Connect
the standard USB plug end of the cable into the USB port on your computer or other USB charging device.
The indicator light will illuminate red.
2. When the indicator light goes out, the battery is fully charged.
3. After charging, remove the micro USB cable.
Low battery warning:
When you hear two beeps at regular intervals, please recharge the speaker.
PARING WITH A BLUETOOTH-ENABLED DEVICE
1. Turn on the speaker.
The speaker will enter Bluetooth modeand the indicator light will flash blue quickly.
2. To pair, go to Bluetooth settings on your Bluetooth enabled device and connect to “Gladorn SoundPlato”.
Enter “0000” if asked for a passcode.
Micro USB cable
3.5 mm audio cable
