Gladiator CONVERTIBLE REFRIGERATOR, Use & Care Manual, Page: 11 / 17

11
Baskets
Half-width Wire Basket
To Remove and Replace the Basket:
1. Remove all items from basket. Remove the basket by lifting the
front out of the slides, then lifting the basket out.
2. Replace the wire basket by lowering the basket into the slides
then pushing the basket backward until it is under the shelf.
Full-width Wire Basket
To Remove and Replace the Basket:
1. Remove all items from basket. Remove the basket by lifting the
front out of the ball-bearing slides, then lifting the basket out.
2. Replace the wire basket by first extending the ball-bearing slides,
then lowering the tabs on the sides of the wire basket into the
slides. Push the basket backward until it is under the shelf.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food, the
type of packaging or wrap used (should be airtight and moisture-
proof), and the storage temperature. Seal the package or container
securely to prevent taste and odor transfer throughout the product.
Ice crystals inside a sealed package are normal.
Put no more unfrozen food into the freezer than will freeze within
24 hours (no more than 2 to 3 lbs of food per cubic foot [907-1,350 g
per 28 L] of freezer space). Leave enough space in the freezer for air
to circulate around packages. The freezer door must close tightly. For
more information on preparing food for freezing, check a freezer
guide or reliable cookbook.
DOOR FEATURES
Door Rails
The door rails may be removed for easier cleaning.
To Remove and Replace the Rails:
1. Remove the rails by pulling straight up on each end of the rail.
2. Replace the rails by sliding the shelf rail into the slots on the door
and pushing the rail straight down until it stops.
Door Bins
To Remove and Replace the Bins:
1. Remove the bin by lifting it and pulling it straight out.
2. Replace the bin by sliding it in above the desired support and
pushing it down until it stops.
Wire Door Shelf
To Remove and Replace the Shelf:
1. Remove the wire door shelf by lifting it out of the door rail.
2. Replace the door shelf by sliding it into the back of the door rail
and snapping it into place.