ASSEMBLED
DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole,
Do
Not
over tighten. Screw post down
until bottom face of post flange just
touches board surface.
H2
H3
E
H1
H1
Install four Plastic
Housings (H1) into
each shelf. Attach a
Book Stop (H2) to
each Fixed/Adjustable
Shelf (E) using five
Panhead Screws (H3)
in the pre-drilled holes.
# 1
# 2
Install eight Plastic
Housings (H1) into the
Top Panel (C) as shown.
H1
C
H1
H1
H1
H1
H1
H1
H1
H1
