STEP 3. APPLYING THERMAL PADS
Remove the protective film and place the
the thermal pads on correct position on
the PCB.
STEP 4. MOUNT THE WATER BLOCK
Carefully position the water block onto the
graphics card. Align the mounting holes on
the PCB with the holes on the water block.
Secure the water block with 13 M2,5x5mm
screws and washers to the PCB.
STEP 5. CONNECT D-RGB LIGHTING
Connect the D-RGB cable to the D-RGB strip
in the water block.
STEP 6. INSTALLING FITTINGS
Install G1/4 threaded male fittings and
close the remaining ports with the two
included Stop Fittings.
5
2
Make sure to remove the protective film on
both sides of the thermal pads.
13x
13x
Connect to
Phanteks Case / Motherboard Cable
Always perform a leak test before providing
power to any system components.
You can connect the D-RGB cable to a
compatible motherboard with the cable
that is included with the motherboard.
Make sure to lay the GPU with the water
block flat down without resting on the
PCI bracket.
5
1
4
2
3
3
3
3
3 3 3 3
3 3 3 3
1 2
3
3
3
3
3 3 3 3
RTX 2080
RTX 2080Ti
All Phanteks D-RGB products can be
daisy-chaned together.
3 3 3 3
3 3 3 3
1
3 3 3 3
4
