background image

 

11

 

 

HOMEDEPOT.COM/GLACIERBAY

Please contact 1-855-HD-GLACIER for further assistance.

Troubleshooting

Problem

Possible Cause

Solution

There are leaks from the 
handle.

The bonnet nut has come loose and/or the 
washer is dirty or damaged.

 

Tighten the bonnet nut.

 

Clean or replace the washer.

The aerator has an 
irregular or reduced 
water flow.

 

Remove the aerator and 
check for debris. 

 

Ensure that the rubber washer 
is properly installed.

The water will not shut off 
completely.

The cartridge is dirty or broken.

 

Remove the handle to check
the cartridge.

 

Clean or replace.

The aerator is dirty or mis-fitted.

NOTE: 

Refer to the service parts section in this manual for 

a detailed drawing showing the location of the parts listed 
below.

There is leaking from the
sink drain at the base of
the sink.

The sink has a rough or irregular surface.

 

Apply additional silicone sealant 
to the beveled side of the drain 
flange. 

 

Retighten and test for leaks.

Water comes out of the
douche spray and bidet
at the same time.

The 

seat & spring on the diverter 

is dirty

or broken.

  

 

Remove the 

transfer handle 

assembly

 to check the 

seat 

& spring.

 

Clean or replace.

Care and Cleaning

 

To clean, wipe down with a damp cloth and dry with a towel.

 

Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will 
be voided.

Summary of Contents for 67734-6001



























Reviews: