background image

 

 

 

Care and Cleaning

 

To clean, wipe down with a damp cloth and dry with a towel.

 

Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will 
be voided.

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Troubleshooting

Problem

Possible Cause

Solution

There are leaks from the 
handle.

The bonnet nut has come loose and/or the 
washer is dirty or damaged.

 

Use wrench to retighten the
bonnet nut sufficiently.

 

Clean or replace the washer.

The aerator has an 
irregular or reduced 
water flow.

 

Remove the aerator and 
check for debris. 

 

Ensure that the mesh washer 
is properly installed.

The water will not shut off 
completely.

The cartridge is dirty or broken.

 

Remove the handle to check
the cartridge.

 

Clean or replace.

The aerator is dirty or mis-fitted.

NOTE: 

Refer to the service parts section in this manual for 

a detailed drawing showing the location of the parts listed 
below.

There is leaking from the
sink drain at the base of
the sink.

The sink has a rough or irregular surface.

 

Apply additional silicone sealant 
to the beveled side of the drain 
flange. 

 

Retighten and test for leaks.

Summary of Contents for 1002707348



















Reviews: