8
[Heading goes here]
Care and Cleaning
□
Cleaning with a dry cloth may be sufficient.
□
For other stains or marks, wipe gently with a damp cloth.
□
Do not use strong detergents or abrasive cleaners; they may damage the surface of this product.
7
Mounting the unit to the wall
NOTE:
For safety reasons, it is imperative that this unit
be mounted to the wall.
NOTE:
Before cutting, drilling or hammering into any wall
surface, verify the location of electrical, plumbing and gas
lines. Cutting any of these may cause serious injury.
□
Mark mounting points on the wall through the holes in
the rear tubes of the unit.
□
Hammer wall anchors (EE) into the wall, unless the mounting
screws (DD) will go directly into a stud.
□
Place the unit against the wall, lining up the wall
anchors (EE) and holes in the rear tubes.
□
Tighten the mounting screws (DD) into studs or wall
anchors (EE).
EE
DD
Installation (continued)