4
Installation
1
Installing the faucet assembly
□
Install the faucet body (A)-including supply
hoses and sensor cable (1)-through the hole
in the sink.
CAUTION:
Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE:
This step is fo
r no escutcheon
installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 2.
2
Installing the escutcheon
□
Screw the bolts (H) into the escutcheon (G) and
ensure that the gasket (I) is pressed onto the
escutcheon (G) before the escutcheon (G) is
installed over the three holes in the sink.
□
Secure the escutcheon (G) to the sink using the
mounting nuts (J) provided. Hand tighten only.
NOTE:
If the sink is uneven, use silicone under the
gasket (I).
NOTE:
This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Shut off the water supply. Remove the old
faucet.
□
Clean the mounting surface.
□
Proceed to step 4.
A
1
G
H
I
J