7 HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Maintenance
□
To maintain the beauty of the furniture finish, avoid placing the vanity in direct sunlight.
□
Avoid exposing the vanity to extreme temperatures by installing away from heat and air vents.
Care and Cleaning
□
Dust frequently with a clean, soft and dry cloth.
□
Wipe away any water or liquid spills on the vanity base immediately with a clean, soft and dry cloth.
□
Clean the vanity top only with non-abrasive cleaners or mild detergents – do not use powder cleansers. For extremely stubborn
stains, use a small amount of acetone on a cloth and gently rub out the stain.
Troubleshooting
Problem
Possible Cause
Corrective Action
Vanity door rubs against another
surface.
The floor is not level.
□
Use a shim to ensure the vanity is level.
□
Adjust the door hinges.
There is an uneven gap between the
door and cabinet.
The floor is not level.
□
Use a shim to ensure the vanity is level.
□
Adjust the door hinges.
Vanity top wobbles when placed on the
vanity base.
□
The vanity base is not installed level and
plumb.
□
The underside of the vanity top is uneven. This
can be a common occurrence in porcelain
tops due to the manufacturing process.
1) Ensure the vanity base is level and
plumb. It may be necessary to use shims
if the base sits uneven (see Planning
Installation section).
2a) Identify which corners have the wobble.
2b) Carefully remove the vanity top and
turn it over.
2c) Apply the bumpers (C) adhesive side
down on the corners of the vanity top that
you identified in Step 2a.
2d) Carefully place the top back onto the
vanity base and make any necessary
adjustments to the bumper placement(s)
until the vanity top does not wobble.
C
C
