16
Water cooler does not operate.
• Make sure the power cord is properly connected to a
working outlet.
• Look if two power switches at the back are ON.
They will glow in ON position if power gets to them.
Turn them OFF and ON to make sure that cooler is plugged in
and circuit breaker is not tripped. If needed use other receptacle
and confirm there is an electricity going to the cooler.
• Please make your test carefuly. Intermittently working pump may
give you fales impression.
No water is coming from the taps.
• Make sure the bottle is not empty. If so, replace it.
If not, adjust probe to an appropriate
length. Refer to page 7 point 2 for instructions.
• Romeve probe from bottle Remount as per instruction
on page 7 point 2.
• Make sure the door is fully closted. This will activate
the pump which is needed to deliver water into
the reservoir.
• Make sure to push the probe assembly is fully.
Checking pump for proper operation.
To deliver water from the bottle an pump is used, not water pump, Pump creates an air
pressure inside of the bottle to push water upwards. Pump
works intermittently. 5 seconds on and 10 seconds off.
Some times it is difficult to hear if pump works or not.
• Please open door.
• Place your left hand ON THE PUMP(see part NO 18).
Right hand on the door switch (see part No 17).
TROUBLESHOOTING
16
6
17
18
19
