20
Water is leaking
• If leak remains, remove the probe from the bottle and call 1-844-452-2425 for assistance.
Push buttons are stuck and/or faucets are leaking
• Apply mineral oil (baby oil) to button slides to reduce friction.
Cold water is not cold
• It takes up to 1 hour after setup to cool water fully.
• Make sure the back of the dispenser is at least 4 inches from a wall and there is free airflow on all 4
sides of the dispenser.
• Make sure energy saving switch is ON.
1. Remove U-shaped lock.
2. Press collet and pull
tubing out.
3. If end has burrs, clean it up with pencil sharpener, do not make
chamfer large, it will cause leak.
4. Push tubing in all the way.
5. Reinstall U-shaped lock.
