background image

Model # 7LIECH-BP-G: Page 2

SAFETY PRECAUTIONS 

IMPORTANT: Do NOT Return Dispenser To Store. 

If you have a question or problem, please contact 844-GLACIAL(452-2425) for assistance. 

                                     IMPORTANT SAFETY INSTRUCTIONS

WARNING:

 

To reduce the risk of fire, electric shock, or injury when using your water cooler, follow these basic precautions:

■ Plug it into a grounded 3-prong outlet.  

■ Do not remove the ground prong. 

■ Do not use an adapter. 

■ Disconnect the power before servicing.   

                                     SAVE THESE INSTRUCTIONS

 

■ Replace all the parts and the panels before operating. 

■ Do not use an extension cord.

■  Two or more people should move and install the water cooler

   and the bottles.

WARNING

DANGER

All safety instructions will inform you what the potential hazard is, how to reduce the chance of injury, and what can 

happen if the instructions are not followed.

                              Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and your appliance. Always read and follow all 

safety messages.
                         This is the safety alert symbol.
                         This symbol alerts you to potential hazards that can kill or hurt you and others.
                         All safety messages will follow the safety alert symbol and either the word “DANGER”or “WARNING”
                         These words mean:

                                                                                      You can be killed or seriously injured if you don′t 

immediately 

                                                                                      the follow instructions.

                                                                                      You can be killed or seriously injured if you don′t follow the  

                                                                                      instructions.

When operating this dispenser, please observe the following:

•   Prior to use, this dispenser must be properly assembled and installed in accordance with 

this manual. 

•   This dispenser is intended only for water dispensing. Do NOT use other liquids. Do NOT  

use for other purposes. Never use other liquids in the dispenser other than known and 
microbiologically safe bottled water. Warranty is void if used with any other liquids, such 
as coffee, tea, juices, beer or wine. 

Location Requirements:

 

•   Install in the area where it is protected from the elements including direct sun.
•   Install and use only on a hard, flat and level surface. 
•   Do NOT place the dispenser inside an enclosed space or cabinet.
•   Position the dispenser no closer than 4 inches from the wall with at least 4 inches clear

-

ance on the sides to permit free airflow.

•   Service should only be performed by a certified technician. Please contact us at 844

-

GLACIAL(452-2425) for assistance.

Summary of Contents for 7LIECH-BP-G


















Reviews: