10
GAIN switch
GAIN switch with help of PEAK indicator enables to match the chorus sensitivity
to the signal. It is recommended to set GAIN switch to HIGH position, switch on the
chorus effect and check if PEAK indicator lights while playing (especially on clean
tone). If it does, the GAIN switch should be set to LOW position.
In the HIGH range the maximum input signal is +5 dBu (+2,8 dBV) and in the LOW
range it is +10 dBu (+8 dBV).
Footswitches
The TCH-1 features effect ON/OFF and chorus A/B selection footswitches.
ACTIVE indicator signalizes state of the effect and A and B indicators signalize
selected chorus type.
Chorus tone setting
To set the chorus tone serve MIX, FAT +X, FAT +XX switches and RATE and
DEPTH regulators. The MIX switch on LOW position enables to obtain the chorus effect
of lower intensity (to the dry signal is added the effect signal with an amplitude of 50%
of dry signal). On HIGH position the proportion between dry and effect signals is one to
one what enables to get maximum intensity of the chorus. Decreasing the intensity of
the chorus effect with the MIX switch has completely different result in the sound than