8
✓
The programming procedure is complete and all the USER keys (black) stored in the lock can now open the lock and all the
DOWNLOAD keys (blue) stored in the lock can now download the data from the lock while the keys deleted from the memory
of the lock can no longer perform any operation (lock opening or downloading of the data).
✓
The pairing of new keys or the deletion of keys previously paired are independent procedures and may be done in a different
order than indicated above. The pairing of new keys or the deletion of keys previously matched are independent procedures
and may be made in a different order than indicated above. For example, you can also choose to only add or only delete.
RESET LOCK WITH MASTER KEY
Caution: The reset procedure will inhibit the operation of all USER keys (black) and possibly DOWNLOAD key (blue) previously
paired with the lock by restoring the factory configuration. Therefore, at the end of the operation, the lock will be in the "Initial
Programming" waiting state and it can accept any MASTER key (red) for programming.
•
In order to reset the lock, it is necessary to insert and extract the paired MASTER key (red) (used for the initial programming)
in succession for 5 times
•
Insert and remove the MASTER key (red) 5 (five) times in succession. Verify that the alerts are as follows:
1° insert (1 fast green LED blinks)
2° insert (1 long green LED blinks)
3° insert (2 fast green LED blinks)
4° insert (3 long green LED blinks)
5° insert (1 long green LED blink and 1 long red LED blink)
The 5
th
signal on the key ( ) shows the effective lock reset, it has therefore reverted to the factory settings "Before
Programming"
•
If the RESET procedure has been started by mistake it will be possible to interrupt it, after the 2nd insertion, at any time before
the RESET (5th insertion); in order to interrupt the reset procedure, just insert any USER key (black) previously memorized on
the lock.
•
Attention: if the USER key (black) is inserted after the first insertion, the USER key would, as previously indicated, be eliminated
from the lock: a single long green LED blinks will be emitted and then the red LED ( ) to indicate the cancellation
of the key from the lock.
