Set the wheel on turntable, pressing tyre from over the jaws, and
lock the rim paying attention it doesn’t slip out of the jaws (this
operation might turn out difficult or even impossible).
Use the PRESS ARM to push the wheel downward so making its
clamping easier.
Correct clamping
Manual procedure
Assisted procedure
Summary of Contents for HELP
Page 2: ...Tyre REMOVAL...
Page 12: ...Set the tyre inner bead on tool A upper side and the outer bead on tool lower side B A B B A...
Page 17: ...Tyre fully mounted Turn the turntable clockwise as to mount the tyre completely...
Page 19: ...NO 0 This photo shows a too HIGH position of the bead as to the rim groove...
