Gitzo GHF2W, Manual

Page: 8 / 40

English
FIG. 1 – Assemble Handle Bar
Assemble the handle bar “A” as shown in figure.
The pan bar length can be adjusted by locking the bar with knob “B” at
the desired position. The rosette “X” has teeth to allow the pan bar to be
positioned at various intervals.
FIG. 2 – How to remove the camera plate
Hold the camera plate, loosen screw “C” as shown in the diagram, and
lift the plate out of the quick release adaptor.
FIG. 3 – How to mount the equipment on the plate
To tighten the plate you can use
- a coin “A”
- ex key “E”
- the screw’s flip ring “D”
The plate can be mounted on the camera/lens in different directions.
FIG. 4 – How to mount the equipment on the head
Insert the equipment and plate from above. Tighten knob “C” to lock the
camera securely in place. The quick release adaptor allows the sliding of
the plate when the locking lever is not fully locked, and includes a safety
pin that prevents accidental fallings of the camera.