EDR User’s Manual
20
Installation of VCI module and DLC main cable
B a s i c F e a t u r e s
Installation of VCI module and DLC main cable
First locate the Data Link Connector (DLC), to communicate between the ECU and the EDR.
The location of the Data Link Connector (DLC) may vary depending on the type of vehicle.
Usually located on th
e lower instrument panel, on the driver’s side.
DLC may be installed in the engine room. Check for the proper location on each vehicle.
Some older model vehicles, which do not use a 16-pin (OBD II diagnosis -SAE J1962) connector,
must use a 16-pin suitable adapter. The SCSI connector is on the other side of this 16-pin
diagnosis connector.
The SCSI connector must be connected properly at the VCI module. And the user must check the
connection condition once complete.
Figure 1. Connect the DLC main Cable to the OBD-II Connector
Installation of main DLC cable
