TS-MX300-AC
(134,2 kHz System)
GiS Gesellschaft für Informatik und Steuerungstechnik mbH * Tel: +49 (0)7026-606-0 * Email: [email protected]
Creating applications
Applications for MX300 are written in MX300 Basic. A complete description of the MX300
Basic language is contained in the MX300 Software Suite.
You can load the MX300 Software Suite from our homepage at http://www.gis-net.de/rfid.
The MX300 Basic Manual can be shown directly from MX300 Explorer using the button
"Basic ?".
Sample applications
Together with the TS-MX300 some MX300 Basic sample applications are delivered. These
sample applications are installed to the device. They can be extracted from the device using
"MX300 Explorer" and then be changed.
Usage and changing of these applications is explicitly granted.
ATA5577ViewEM4305View Hitag2View
HitagMView
Reading some data block of a ATA5577 / EM4305 / Hitag2 resp. Hitag µ transponder and
viewing them.
Shows the usage of the tag type selected, the block read command and the usage of the display.
FDXB-to-ATA5577 FDXB-to-EM4305
FDXB-to HitagS
Reading a FDX-B transponder and copying the content to a ATA5577 / EM4305 resp. Hitag S
transponder.
Shows the usage of the tag type selected, the Animal Code read and write command and the
usage of the display.
AnimalLogger
Reading a FDX-B or HDX animal transponder and viewing the content. Each reading is tagged
with date and time and stored in a text file, where file name contains the date.
Shows the usage of Animal code read command and also the usage of the display and
possibilities in storing to file. Here the usage of the actual time for creating a file name and
storing data is also shown. Additionally the possibility of showing pictures at the display is
shown.
HitagSEdit
Read a block of a Hitag S transponder, Edit the content and write back to the transponder.
Shows usage of block read and write commandos as long as viewing and editing of data at the
display. Additionally the possibility of showing pictures at the display is shown.
