Configuration menu
26
Code no. 576017
Rev. nº 02/0415
7. CONFIGURATION MENU
The CONFIGURATION menu contains many settings that allow the operation of the dryer to be adapted to the
specific needs of each user.
Details of the CONFIGURATION menu
7.1. Settings
7.1.1. General settings
Language:
Permits selecting the language of all the written messages.
Programmable values
: ESP (Spanish), ENG (English), FRA (French), ITA (Italian), DE (German), CAT
(Catalan).
Factory settings
: depending on specification.
Default value
: English.
Temperature unit:
Permits selecting the unit that the temperature values are displayed in.
Programmable values
: C (degrees Celsius)
| F (degrees Fahrenheit).
Factory settings
: depending on specification.
Default value
: Degrees Celcius.
Beep on keypress:
An acoustic warning that the dryer emits when a key is pressed.
Programmable values
: YES / NO
Default value
: YES
Screen contrast:
Permits modifying the contrast on the dryer screen.
Programmable range
: 0 (less contrast) … 9 (more contrast).
Default value
: 4
Blink on end:
Shows end of cycle screen flashing.
Programmable values
: YES / NO
Default value
: YES
Maximum lint filter cleaning time:
This allows the user to set a number of hours after which, if the filter door has
not been opened, the dryer will display a discreet filter cleaning reminder.
Programmable range
: from 0 to 48 hours. Programming 0: deactivates the cleaning reminder
Default value
: 2
When the number of hours since the last opening of the
filter door is equal to the set value, the machine will report
this by turning off a pixel in the upper right corner of the
screen frame (position
A
in the attached figure).
Machine ID
: This parameter assigns a network identifier to the dryer. This identifier enables the communication of
the dryer with the environment through a system based on RS-485 protocol.
Programmable range
: 0 (disabled communications) … 1-99 (enabled communications)
Default value
: 0
