WINDING
The self-winding system keeps your watch wound if you wear it at least 14 hours a day.
If your watch has not been worn for some time, rewind it manually.
Crown in two positions:
0. Manual-winding position (crown not pulled out).
1. Time setting position (crown fully pulled out).
Manual-winding
Your watch requires regular winding to work normally.
To wind, turn the crown backward and forward when it is in position 0).
When fully wound, your watch has a power reserve of approximately 50 hours.
Warning: do not force the crown once the resistance increases as this could
damage the movement.
SETTING THE TIME
1. Unscrew the crown and pull it out to the time setting position 1).
2. Turn your crown clockwise to position the hour and minute hands at the selected time. At the
time signal, push the crown back to position 0). Your watch will restart immediately.
Warning: after making any setting, always return the crown to its original position and screw
it, to preserve the water resistance of your watch and prevent any damage to the mechanism.
To do so, press the crown against the case in position 0) and screw it back.
INSTRUCTIONS FOR USE
