Girard-Perregaux COSMOS, User Manual, Page: 9 / 12

WINDING
The winding bélière is placed at the back of the watch at the bottom center.
Manual-winding:
Your watch requires regular winding to work normally. To wind, pull the bélière up and turn it
clockwise 11 times for a full winding. Once the watch is wound up, push the bélière down to its
original position.
When fully wound, your watch has a power reserve of minimum 57 hours.
Warning: Do not force the bélière once the resistance increases as this could damage the
movement.
SETTING THE TIME
The time setting bélière is placed at the back of the watch at the top center.
Pull the bélière up and turn it clockwise. Once the time is set, push the bélière down to its original
position.
SETTING THE DAY/NIGHT INDICATOR
The day/night indicator bélière is placed at the back of the watch on the left-hand side.
Pull the bélière up and turn it clockwise to align the mark “12” of the graduated ring with the
location where it is 12 o’clock. The terrestrial globe acts as a day/night indicator as the day appears
on the dial side and the night on the case-back. Once the day/night indicator is set, push the bélière
down to its original position.