6
7
Connecting or replace plug and electrical cable MUST be carried out by qualified staff;
DO NOT pull fiercely when discharging the plug;
Electrical cable should be far away from fire and sharp object;
Cut the power supply immediately in case of breakdown or stop and find out the
reason before re-start the appliance;
To be sure the appliance standing on dry surface.
All electrical conductors MUST BE PROTECTED against the water jet.
SHORT CIRCUIT
HAZARD
The appliance MUST ONLY BE CONNECTED to an adequate power supply in
compliance with all applicable regulations.
ELECTRIC SHOCK HAZARD
Use of a safety residual current circuit-breaker (R.C.C.B) will provide additional
protection for the operator;
Appliance without plug MUST be installed by qualified staff;
Use only authorized electrical extension leads with suitable conductor gauge.
High pressure may cause parts to rebound: wear all the protective clothing and
equipment needed to ensure the operator’s safety.
INJURY HAZARD
Plug MUST be pulled out after shutting the appliance or the appliance might start
automatically or burn itself;
Holding the gun firmly before triggering it.
INJURY HAZARD
COMPLY WITH the requirements of the local water supply company. According to
EN 12729(BA), the appliance may only be connected to the mains drinking water
supply if a back flow prevented valve with drain facility is installed in the supply hose.
21.
22.
23.
24.
25.
1.
2.
3.
4.
5.
6.
7.
8.
SAFETY “MUSTS”
SHOCK HAZARD
DO NOT jam the trigger in the opening position.
ACCIDENT HAZARD
Check the data plate attached to the appliance. If not available, please contact the
dealer. Do Not use the appliance without data plate because it’s not sure safe or
dangerous.
DO NOT tamper with or adjust the setting of safety valve or the safety devices.
EXPLOSION HAZARD
DO NOT alter the original diameter of the spray head nozzle and other operation
setting;
Make sure that the high pressure hose are free of being pressed by car or other heavy
objects or cut by sharp objects;
DO NOT leave the appliance unattended
ACCIDENT HAZARD
When directed towards tyres, tyre valves or other pressurized components, the high
pressure jet is potentially dangerous. Do not use the rotating nozzle kit, and always
keep the jet at a distance of at least 30 cm during cleaning.
EXPLOSION HAZARD
DO NOT use this appliance to clean fragile objects.
DAMAGE HAZARD
Check that the electrical supply voltage and frequency correspond to those specified
on the appliance data plate.
The appliance should only be connected to a mains power supply equipped with an
adequate earth connection.
DO NOT use the appliance after drinking alcohol, taking medicine or being tired;
DO NOT direct the jet towards the not strong wall to avoid damage and danger;
Use only extension electrical cable with waterproof plug and socket;
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
