Practical assembly
Caution! Installation and assembly of electrical devices may
only be carried out by an electrician.
Switch the supply voltage off! Necessary screws,
pins, and drilling template are included.
1. Drill according to the drilling template (Ø 6 mm).
2. Punch out cable entry (do not use a knife!).
3. Insert cable and screw on socket.
TOP / OBEN must be on top with ceiling mounting
in the direction of the area to be detected.
4. Electrical connection according to the diagram
(see page 12/13). Do not place lines across terminals!
Otherwise, the upper part can not engage.
5. With AP cable entry: Remove appropriate covers for
the cable entry.
6. Put on upper part and engage audibly (guides!).
7. Turn the dome to the left and remove (bayonet).
8. Adjust lens, with ceiling mounting, pivot 90°.
7
Summary of Contents for Tectiv 220
Page 2: ...1...
