![Gira KNX 5001 Series Operating Instructions Manual Download Page 2](http://html1.mh-extra.com/html/gira/knx-5001-series/knx-5001-series_operating-instructions-manual_2229001002.webp)
Pushbutton sensor 4 Komfort
Rear view (Figure 2)
Figure 2: Device components - rear side
(d)
Device connection terminal for remote sensor
(e)
Locking screws
(f)
Opening for removing the KNX connection terminal with screwdriver
(g)
Device connection terminal KNX
3
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed tech-
nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable soft-
ware and attainable functionality as well as the software itself can be obtained from the manu-
facturer´s product database. Planning, installation and commissioning of the device are carried
out with the aid of KNX-certified software. The latest versions of product database and the tech-
nical descriptions are available on our website.
4
Intended use
–
Operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, 1 byte values, 2
byte values, brightness values, temperatures, calling up and saving light scenes
–
Mounting in appliance box according to DIN 49073
5
Product characteristics
–
Push-button sensor functions switching, dimming, Venetian blind, value transmitter, scene
extension, 2-channel operation and controller extension adjustable
–
Controller extension with operating mode selection, forced operating mode switch over,
presence function and setpoint shift
–
Status LED - optionally red, green, blue, yellow, cyan, orange, violet, white - adjustable
per button
–
LED functions orientation lighting, alarm signalling and night reduction can be set separ-
ately
–
Brightness of LED adjustable and switchable while in operation
–
Disable or function switch-over of all or of individual button functions possible with dis-
abling function
–
Scene control up to 8 scenes with 8 scene outputs each
–
Temperature measurements optionally with device internal sensor, wired sensor to the
connection terminal and external sensor connected via communication object
–
Room humidity measurement with internal device humidity sensor
2 / 6
32401902
10866576
16.10.2019