Gira 834 Plus, Installation, Start-Up, Operation

Page: 15 / 28

Installation and start-up
15
06.2017/V 1.2
2.6.2 Deleting device assignment to a radio emergency set
i
Note:
Description applies to devices that are part of a radio emergency set!
To assign devices to a radio emergency set, see 2.6.1.
Important:
Only delete several device assignments one after another.
For each device, implement steps 2 to 3 in succession.
Step Set the device into
programming mode Response (signalling)
of the device during deletion of assignment
1 1. Device = radio call module:
Press and hold the program-
ming button for longer than
3 seconds.
2 2. device to be deleted
Press and hold the program-
ming button for longer than
3 seconds.
3 Result:
The device assignment to the
set is deleted and the status
LEDs on both devices flash
rapidly.
The device deleted from the
assignment exits programming
mode.
The radio call module remains
in programming mode.
4 Deleting a further device
Continue with step 2.
5 Exit programming mode
Press the programming button
once.
i
Note:
Programming mode is terminated automatically after 5 minutes.
Programming mode and thus also the flashing of the LED terminates automatically after
5 minutes independently of the programming button being pressed.
Flashing frequency: 1 Hz
Flashing frequency: 1 Hz
Flashing frequency: 2 Hz
The LED goes out
Flashing frequency: 1 Hz
Flashing frequency: 1 Hz
The LED goes out