￭
Press programming button again and hold about 5 seconds until status LED
goes out.
￭
Release the programming button.
The status LED lights red briefly and then yellow.
The device is reset to default setting.
7
Technical data
KNX RF
KNX medium
RF1.R
Commissioning mode
S-mode
Radio frequency
868.0 ... 868.6 MHz
Transmission capacity
max. 20 mW
Transmitting range in free field
typ. 100 m
Receiver category
(Data according to EN 300220)
2
KNX TP (media coupler/segment coupler operation)
KNX medium
TP256
Commissioning mode
S-mode
Rated voltage KNX
DC 21 ... 32 V SELV
Current consumption KNX
3.9 ... 5.1 mA
Repeater operation
Rated voltage
DC 24 V SELV
Degree of protection
IP20
Protection class
III
Ambient temperature
-20 ... +45 °C
Storage temperature
-25 ... +55 °C
Transport temperature
-25 ... +70 °C
Relative humidity
10 ... 100 % (no moisture condensation)
Dimensions L×W×H
44x29x16 mm
8
Accessories
Power supply 24 V DC 300 mA
Order no. 1296 00
8 / 9
32591122
10867569
14.11.2022
RF/TP media coupler/repeater
